Page 3 ---- Power Supplies

Dudley Lab

Return to Home Page for index and Contact info

--- September 8, 2017 ---

QTY Part Number Power Supplies Price US$
1 Spellman Power Supply
RPH 20P4/FPS/X1642
Dudley Lab
Spellman Power Supply RPH 20P4/FPS/X1642 SN-C009891
Please think of this item as parts, for repair.
Filament and HV Supply with.
1) Master
1) RHP3
1) Slave
1) RHP3
HV 20kV 400mA
Prime Power 208VAC 3 phase
Link to Larger Photo 1
Link to Photo 2
Link to Photo 3
Link to Photo 4
$1,800
1 Savant High Voltage Power Supply - HV-5000-U1-1-115-3
0 to 5000 Volt, 0 to 300mA
Dudley Lab
Savant High Voltage Power Supply
HV-5000-U1-1, SN-53-79-030-115
0 to 5000 Volt, 0 to 300mA (+V output, -V is grounded)
Load Tested
Prime Power 120VAC 50/60Hz
Link to Rear Photo
$1400
1 Power Design High Voltage Power Supply
10 to 5KV DC 0 to 20mA Regulated
Dudley Lab
Power Design 1545 SN-901014
Regulated High Voltage Power Supply
10 to 5KV DC 20mA
Nice Condition Inside and Out
Prime Power 120VAC 50/60Hz
Link to Larger Front Photo 1
Link to Rear Photo 2
boxed in storage
$1,200
1 Power Ten P63C-40166 DC Power Supply
0 to 40 VDC, 0 to 166 Amps
Dudley Lab
Power Ten P63C-40166 DC Power Supply
0 to 40 VDC, 0 to 166 Amps
Prime Power 200 to 240VAC 3 Phase (L21-30P)
Link Photo 2
Link Photo 3
Link Photo 4
Power Ten Power Supply docs.pdf

Unit is NEW with original packing from manufacturer.
Will need to ship on a pallet by truck.
$1,600
NEW Item
1 HP Agilent 6011A DC Power Supply 0-20V/0-120A
Dudley Lab
Hewlett Packard 6011A DC PS SN-...00205
0-20V/0-120A (1000 Watts)
Prime Power 120VAC 50/60Hz
$750
1 HP-6623A DC Power Supply
Dudley Lab
Hewlett Packard 6623A DC PS SN-3043A01804
Four Fully Isolated Power Supplies
3 U Package Dual-Range Outputs
Fast, Low-Noise Outputs
Built-In Measurements and Advanced Programmable Features
Protection Features to Ensure DUT Safety
Outputs: 3
Output 1: 0-7V, 0-5A or 0-20V 0-2A
Output 2: 0-7V, 0-10A or 0-20V, 0-4A
Output 3: 0-20V, 0-2A or 0-50V, 0-0.8A
Prime Power 120VAC 50/60Hz
Link to Page 8 Manuals
boxed in wh
$575
4 HP-6627 DC Power Supply
Dudley Lab file photo
Hewlett Packard HP-6627 DC Power Supply
4 Outputs each:
0-20V, 0 to 2A
0-50V, 0 to 0.8A
With HPIB
New HP Cost is $12,000
Prime Power 120VAC 50/60Hz
Link to Page 8 Manuals
boxed in wh
$690 ea.
10 PECO II DC Power Supply
50.5 to 56.8VDC, 0 to 50A
Dudley Lab
PECO II DC Power Supply
PEC 1015 SM50F48PM
50.5 to 56.8 VDC
0 to 50A
Prime Power 220VAC
These Power Supplies are fully Load Tested at 51 VDC, 0 to 50 Amps.
Height 9.37"
Width 5.12"
Length 15"
Link Photo 2
Link Photo 3
Link to Page 8 Manuals
$575 each
1 EXTECH 382-210 DC Power Supply
0-30V, 3A
Dudley Lab
EXTECH 382-210 0-30V, 0 to 3A Power Supply
Load Tested, Very Good Condition
Link to Photo 2
Prime Power 120VAC 50/60Hz
$155
3 HP E3617A
0 to 60VDC, 1A
Dudley Lab
Hewlett Packard E3617A Power Supply
Range 1 to 60 V, 0 to 1 A
Power (max): 60 W
Ripple & Noise from 20 Hz to 20 MHz
Voltage rms: 200 µV
Peak-to-Peak: 1 mV Load & Line Regulation
0.01% + 2 mV Meter Resolution
Voltage: 10 mV (0-20 V), 100 mV (>20 V) * Current: 1 mA
Prime Power 120VAC 50/60Hz
Link to Larger Photo
Link to Specifications/Manual
$125 each
0 HP 6632A
0 to 20VDC, 0 to 5A
Dudley Lab
Hewlett Packard 6632A Power Supply
100 Watt, single output, series pass regulated supply is rated 0 to 20 V @ ±5 A. Both the voltage and current output can be programmed for either CV or CC operation. A built-in DCM and precision current shunt measure (readback) the actual power supply output. The internal HP-IB interface allows for complete programmability, including status reporting and interrupt generation with user designated fault conditions.
Prime Power 120VAC 50/60Hz
Link to Larger Photo
Link to Specifications/Manual
$200
missing
1 Wayne-Kerr AP10090A 3kW DC Power Supply
0 to100 Volt, 0 to 90 Amps (3kW max.)
Dudley Lab
Wayne-Kerr AP10090A DC Power Supply
0 to 100 Volt, 0 to90 Amps (3kW max.)
Nice unit, I have used this model supply in our lab.
Prime Power 220VAC Single Phase
Link to Larger Photo
Link to Page 8 Manuals
$2,300
HOLD for Repair
1 HP Agilent 6033A System Power Supply
0-20VDC/0-30A/200WDudley Lab
HP Agilent 6033A System Power Supply
0-20VDC/0-30A/200W
Load Tested
Prime Power 120VAC Single Phase
Link to Rear Photo
Link to Front Panel Photo
Link to Manual.pdf
$590
SOLD
1 Prisim Model 0051 SN-PPS50DT Power Supply
0 to 50VDC, 1A
Dudley Lab
Prisim Model 0051 SN-PPS50DT Power Supply
Very Nice Condition
Load Tested 0 to 50VDC, 0 to 1.2A (Rated 1 Amp.)
With HPIB
120/240VAC Prime Power (switch selectiable)
Link to Rear Photo
$200
1 Power Ten 0 to 40VDC, 0 to 10A Power Supply
Dudley Lab
Power Ten 0 to 40VDC, 0 to 10A Power Supply
Very Nice Condition
Load Tested 40VDC 10A
120VAC Prime Power
$200
SOLD
1 Kepco ATE-75-15M DC Power Supply
0-75V/0-15A Dudley Lab
KEPCO ATE ATE-7515-M DC SN-31641
0-75V/0-15A Load Tested
Prime Power 120VAC 50/60Hz
Link to Larger Photo
Link to Kepco Specifications
Link to Kepco Manual
Heavy unit 83# Ship by Truck or Air Cargo
$900
2 ATE 150-7DMG KEPCO Power Supply 0 to 150VDC, 0 to 7A (1000 W)
Dudley Lab
These are very nice power supplyes, NEW
KEPCO ATE 150-7DMG SN-84575, 84585
0 to 150VDC @ 0 to 7A (1000 W) With 488 Interface
Prime Power: 105 to 250VAC (set with straps)
SN-84575 R22-1 strapped for 120VAC
SN-84585 R22-1 strapped for 220VAC
Rack Mount, Price from Kepco $3724
Unit is NEW, Never Installed. Original Packing.
These are nice, I have used this model supply in our lab.
Link to Larger Photo
Link to Kepco Specifications
Link to Kepco Manual
$1,900 ea.
NEW
Original Packing
1 TPS-4006
Dudley Lab
TPS-4000 Power Supply 0-30VDC, 0 to 6A
Like New Condition. We bought this unit new and used it for a couple of years in our lab.
Link to Larger Photo
Link to Page 8 Manuals
$350
1 EMS Power Supply
0 to 13VDC, 0 to 75A
Dudley Lab
EMS Power Supply
PN 004731125, SN-96H-5770
120VAC
Very Nice Condition
Link to Larger Photo
$225
- - -
Page design by Webmaster at Dudley Lab